Wednesday, April 26, 2017

Stretch & Sew 1550: Fitted Basic Dress


Seriously, how could I resist this beauty? 10 darts - 6 on the bodice and 4 on the skirt. I think it was first released in 1967, but this is the 1974 version. 

I changed the neckline to make it more of a scoop, and finished it with French trim. I also swapped out the sleeves. This dress only went to size 40, and I wanted size 42 sleeves at elbow length. So, I used the sleeves from a different Stretch & Sew pattern. I've noticed that some of the earliest Stretch & Sew patterns max out at size 38 or size 40. Later ones tend to go higher. It's not a problem, but just something to keep in mind as you're browsing around for these patterns if you are in the higher size range.

I did a small FBA on the bust, which moved the front waist darts over a little. So, I moved the front darts on the skirt over, too, so that they would still line up. 



I'm really pleased with how well I put in the zipper. It's not perfect, but it's pretty good. I love the 1974 instructions - which basically say, "Do whatever it says on the zipper package." I interfaced the edge with 1-inch-wide knit fusible interfacing, then basted the seam shut, used basting tape to connect the zipper to the seam allowance, and topstitched all of the way around the zipper.

Check out my awesome ponte knit! In some light, it looks purple. In some light, it looks royal blue. I love it all of the time!

I wanted to be able to fine-tune the fit, so I put the back together, the front together, and put the sleeves in, flat, before I basted the side seams and tried it on. I ended up leaving the top alone, but changing the side seams on the skirt from 5/8 of an inch to 3/8 of an inch, to get just a little more room in the hips. 

I used fusible web, for the first time, for the all of the lower hems. This is mostly because my fabric/thread match wasn't perfect, so I was afraid that even an "invisible" hem would show. I didn't think that a coverstitched hem would look right with a pattern this non-tee-shirt-ish. We'll see how it holds up, but I like it, so far. 

Looking at it on the dress form, I probably should have raised the waist a little bit. For my next version, I'll try to put it 1/2 an inch higher, and see how that goes. Otherwise, I'm very happy with the fit!

The bottom of the skirt hits me exactly at the middle of my knee. I'm only about 5'4", so a taller person might want to lengthen the skirt. 


Wednesday, April 19, 2017

Darts in Knits and Stretch & Sew 1505

I had a little of that wonderful bird fabric left over, so I made a Stretch & Sew 1505.






It's a lovely pattern! I did a small FBA and lowered the bust dart a little bit, and ended up with this unholy mess of a pattern piece. I've become a bit stingy with my Swedish Tracing Paper, so I use scraps to fill in when I do pattern adjustments. 

I promised myself that, if this shirt came out well, I would retrace the pattern piece so that I would have a "clean" copy to use later. So, that's what I did before I put everything back in the package. 

I love the scoop neck on this one and the neck treatment is great. It's not just an attached knit band - it's what Ann Person calls a "French Trim." Or, rather, it looks like she had to start calling it a "French" trim after she couldn't call it Chanel Trim, anymore. 

A lot of people who sew seem to be shy about using darts in knit fabric. So far, I've had good results as long as the fabric is 100% cotton or a double knit. I've seen darts in higher-end polyester/spandex blends in ready to wear, though, too. If you snoop shop at White House, Black Market and St. John Knits, you'll see a lot of darts.

The main things that lead to successful darts in knits, it seems to me, are:

1) Use the "right" fabric. It would be asking a lot for a very slippery or thin knit to hold a dart. It's not impossible, I'm sure, but I would test, a lot, before I tried it. Right now I'm saving darted styles for more structured fabrics and dart-free styles for more floppy/stretchy fabrics.
2) Make sure the dart point isn't too close to the apex. This is always important, but looks extra-bad on knits, in my opinion. The dart is sometimes a little more stiff than the fabric around it, so instead of just crawling up the apex, it actually sticks out, away from the body! Not cute.
3) I use a stabilizer under the dart as I sew it, then tear it away after I'm done. This allows me to both  not worry about the dart stretching out as I sew and makes sure I can stitch off the end of the dart without worrying about the machine tangling up. I keep a big pile of 1-inch strips of stabilizer by the machine, to make this easier. 

Wednesday, April 12, 2017

Wednesday, April 05, 2017

Butcher Apron

Just a reminder that the Textile Center's garage sale is coming up. I picked up this pattern at their smaller sale last Fall. Fair warning - I'll be the one elbow-deep in the vintage patterns. I really do use them, too. Take that, person who asked me if I do at that sale. Then, she called them "paper dolls." Weirdo. She was probably a crocheter.